Special Price! for DEWALT DC390K 18-Volt Ni-Cad 6-1/2-Inch Cordless Circular Saw Kit With Special Pomotions & eligible for FREE Super Saver Shipping on orders over $25. Read More...
DEWALT DC390K 18-Volt Ni-Cad 6-1/2-Inch Cordless Circular Saw Kit "build your own swimming pool"
"generator 1200 watt", "pot and pan storage", "installation of engineered hardwood flooring", "children s wall art", "handbag closures", "meditation beads", "frame kitchen cabinet", "living room furniture collection"
Whether building wood decks or dormers, bookcases or kitchen cabinets, the professional-duty DEWALT DC390K 18-volt, 6-1/2-inch cordless circular saw delivers cordless convenience without sacrificing power or performance. An 18-volt battery (included) drives the saw's 6-1/2-inch, thin-kerf blade at 3,700 RPM, an optimum speed for crosscutting and ripping construction lumber, softwood, hardwood, plywood, particleboard, oriented-strand board, and virtually any other sheet.
3,700 RPM for fast rip cuts and cross cuts (view larger).
DC390K 18-Volt 6-1/2-Inch Cordless Circular Saw At a Glance:
3,700 RPM for fast rip cuts and cross cuts
Includes carbide-tipped blade
Includes one battery and 1-hour charger
Three-year limited warranty; one-year free service
Power and Performance
With depth-of-cut capacities of 2-1/4-inch at 90-degrees and 1-5/8-inch at 45-degree (bevel), the DC390K can slice through all 2-by dimensional lumber. The 6-1/2-inch carbide tipped blade gives you 2x cutting capacity at 90 and 45 degrees, and the 0-50-dgree bevel capacity provides additional capacity for a multitude of applications.
A high strength magnesium shoe and upper guard provides increased durability, while a fan-cooled motor with replaceable brushes provides maximum power and durability. It's complemented by a vibration-dampening rubber-grip handle for comfortable handling on big jobs. This circular saw weighs 6.3 pounds.
DEWALT's XRP Extended-Life Battery System
A tool's only useful if it runs long enough to get the job done, and the DEWALT XRP extended run time batteries keep the DC390K running at full tilt. They provide up to 40 percent more run time than standard Ni-Cad batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow.
The DC390K comes with one 18-volt XRP battery and a 1-hour charger.
Warranty
This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's one-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free.
What's in the Box
DEWALT DC390K 18-volt 6-1/2-inch cordless circular saw; carbide tipped blade; blade wrench; operating instructions (batteries and charger sold separately)
0-50 degree bevel capacity provides additional capacity for a multitude of applications (view larger).
build your own swimming pool : DEWALT DC390K 18-Volt Ni-Cad 6-1/2-Inch Cordless Circular Saw Kit>Compare Prices<
I recently got a job building a fence out in the country where the closest power outlet is 400ft away from the project and thought that I needed a cordless circular saw to do the job.I decided on the Dewalt DC390 based on Dewalts' reputation and on the positive reviews here on Amazon. I was a little worried that it came with only one battery but thought I would see how it went before purchasing another expensive battery. Well I took it to the job and started framing the fence using the DC390 and I have to say that I LOVE this saw! It cut through the 2x4's effortlessly, the bevel adjustments were very smooth, and the saw never bogged down once. I would work all morning and plug it into the charger during lunch and the battery would be topped off in 20 minutes and it would run the whole rest of the day without a hiccup.I was also worried that being left handed would be a problem because this saw is designed for righties (unlike my Porter Cable left handed model circular saw) but it wasn't a problem at all. There is a large cutout in the shoe that makes it extremely easy to see my pencil line while cutting.I am so happy with this saw and it is so easy to use that it will be my new "go to" saw for all my projects. I can't recommend it enough.
I got the DC390 as part of the DC6KITA package. From reading the reviews, I was skeptical about the power of the tool when cutting. I broke out a 2X4 and began testing the saw with a fresh battery and the supplied Dewalt 16T blade. Although you cannot force the tool through as in most of the sloppy framing I have seen, it does cut quite nicely and with respectable speed. It is a matter of just letting the tool do the job. Upon ripping down the 2X4, I purposefully went off line so I would have to twist the tool to compensate. I did not find that the saw binded or bogged down. It just kept the RPMs up and did it's job. Is this going to replace a corded circular saw? NO. But for most little projects this tool will do it's job fantastically.To make sure that the tool will actually do it's job acturately, I measured everything with my Starrett Machinist Square and it is true 0 and 45 drgrees. The shown measurements are correct and the depth settings worked well.I rate this at 5 stars because I went into this tool knowing it was not a corded tool. The battery life seems adequate and the portability over the corded is a great bonus.
I purchased this saw about one year ago at a big box store. I was debating between this cordless model and one of the lighter duty DeWalt corded models. I selected this one figuring that it could be useful when on the roof or other location where cords would be a hazard or inconvenient.The saw works well for light duty applications. I have used it easily on 2x4 and 2x6 materials, ripped 4x8 sheets of 3/4 plywood and cut lattice for a porch enclosure project. All done without problems. The battery lasts a lot longer than I expected; I typically can get through medium-sized jobs (say two to four hours for the project) without a recharge.The blade included with the saw is easy to change and is fine for rough work. If I was framing a house, however, I would want a corded saw, but for a homeowner, there is no need to have anything but this saw.I just don't see any downside to owning this at all.
I've been a professional carpenter for 26 years and this saw is terrific. The key word here is "battery". It is not a 15 amp worm drive skillsaw, and it will not completely replace your 110 volt tools. It is extreamly handy to use and capable of real work. In a skilled hand this tool will do a lot of work and not complain about it. Relax, cut straight, let the saw do the work. Highly recommended.
I owned the older Dewalt DW939 saw for several years. It was good little saw and I got plenty of use out of it, but I had always wished that Dewalt would make a cordless saw more like Milwaukee's 18V saw, which I felt was designed more like a cordless saw should be.When first looking over the new model DC390K circular saw kit earlier this year, I was glad to see that Dewalt finally got it right, and purchased one that same week.The DC390's magnesium shoe is lightweight but rigid, much nicer than the stamped steel shoe on the old model. The trigger safety, which was often difficult to use on the old Dewalt saw, is now easy to operate in any cutting position. The small depth-of-cut adjustment knob on the older saw has been changed to a larger lever that can be used even with gloved hands. In addition, the 0 to 50-degree bevel scale has finer graduations that are more accurate than on the old model. The kit includes a plastic case, rip fence, 16-tooth carbide blade, charger and one XRP battery. You will probably want to replace the 16-tooth blade that comes with the DC390, as I did, with a 24-tooth blade, because the stock blade leaves a noticeably ragged cut.Surprisingly, I actually paid less for this saw kit than for the old model I bought almost four years ago.The DC390 may be just a 6-1/2 Inch cordless, but I don't know of a carpenter, plumber or electrician that wouldn't want to have one of these in his truck. They are just that handy for quick cuts of small PVC pipe, crosscutting OSB and 2X.If you're a framer, or need to rip sheets of plywood continuously, you're not going to be happy with any cordless saw. Not even Milwaukee's V28 model, which is a very good tool. Maybe the new Dewalt 36-Volt cordless line, due out sometime in mid 2006, will be the answer for you.Overall, when in competent hands and used within it's limits, the I feel that the DW390 is an excellent go between saw that is a definite time saver for smaller jobs and I have no problem recommending it to anyone.
| (customer reviews)
No comments:
Post a Comment