Hitachi KC10DFL 12-Volt Peak 2-Tool Li-Ion Combo Kit with Carrying Bag Overviews
Includes 12V Peak Cordless Lithium-Ion Micro Impact Driver - WH10DFL, 12V Peak Cordless Lithium-Ion Micro 3/8-in Driver/Drill - DS10DFL, (2) 1.5 Ah Lithium-Ion Batteries, Universal Charger, Driver Bit, Carrying Bag Featuring two 12-volt-peak series tools that fit into places where conventional models can't, the Hitachi KC10DFL 12-volt-peak 2-tool lithium-ion combo kit with carrying bag includes the DS10DFL micro driver drill and the WH10DFL lithium ion micro impact driver. Offering impressive performance and robust power in a compact package, both these tools come with Hitachi's 1.5Ah HXP lithium-ion batteries.
Both powerful, precision-built tools include Lithium Ion batteries and LED lights.View Larger.
The DS10DFL features a 3/8-inch keyless chuck for superior accuracy in drilling and driving.View Larger.
The WH10DFL features a quick change 1/4-inch Hex chuck that allows for simple and fast bit replacements.View Larger.
Two Powerful Drills for Maximum Versatility This kit puts two of Hitachi's most versatile tools in one package, so you're ready to tackle around-the-house jobs with ease. The DS10DFL and WH10DFL provide plenty of power and control in compact, easy-to-handle models.
The DS10DFL comes with a 3/8-inch keyless chuck and a best-in-class 21+1 clutch with 21 torque settings and a drill mode for ultimate precision in both forward and reverse. The WH10DFL is perfect for heavier applications like tightening carriage bolts, driving lags, and sinking deck screws and delivers an impressive 840 in./lbs. of driving torque.
Lithium-Ion Batteries for Steady, Long-Lasting Power Both the DS10DFL and WH10DFL come with Hitachi's 1.5Ah HXP lithium-ion batteries to deliver a steady stream of power throughout every charge, unlike traditional batteries that undergo a power fade from the moment the trigger is pulled. Additionally, Hitachi's patented battery charger features unique circuitry that prevents overheating or power loss, ultimately extending the life of the lithium-ion battery and saving you replacement costs.
Freestanding Drills Feature User-Friendly Triggers, LED Lights Both drills feature responsive, variable-speed triggers for better control during operation, and LED lights positioned under the chucks to effectively illuminate your work surface. For added convenience and easy setup, by partially depressing the trigger you can activate the LED light before the driver is set in motion. And whereas many other models must be laid down on their sides when not in use, the DS10DFL and WH10DFL have unique handles and battery configurations that allow for free standing on their bases.
DS10DFL Tackles General Fastening Jobs, Hardware Installation, and More Incredibly lightweight at 2.2 pounds and compact at less than eight inches in length, the DS10DFL is easy to handle and control as you work. It provides 195 in./lbs. of turning torque and features a 3/8-inch keyless chuck, making it the ideal drill for precision drilling and driving applications, including general fastening and hardware installations, HVAC and electrical operations, computer and electronic equipment repair, furniture assembly, fine finish work and odd jobs around the house.
WH10DFL for Tough, Heavy Fastening and Driving Jobs The WH10DFL is also compact and lightweight, weighing 2.2 pounds and measuring less than six inches in length. It provides 840 in./lbs. of turning torque--more than any other cordless impact driver currently on the market--and features a quick change 1/4-inch hex chuck that allows for simple bit replacements. The ideal impact driver for tough jobs, the WH10DFL drives self-tapping masonry anchors into concrete, brick or block and also takes on heavy fastening application with lag bolts. To help ensure consistent performance, the impact action engages as the resistance of the load increases, which results in increased torque needed to power through the most challenging tasks.
Warranty Information These lithium-ion tools are backed by Hitachi's lifetime lithium-ion tool warranty and two-year lithium ion battery warranty. For additional value and peace of mind, Hitachi's 12-volt peak batteries are 100-percent compatible with all past Hitachi Micro-series tools.
About Hitachi: Breathing Life into a New Era Founded in 1910 as an electrical repair shop, Hitachi offers a diverse line of professional grade power tools and accessories for woodworking, metalworking, drilling, and fastening, and concrete drilling and cutting, as well as a complete line of pneumatic nailers, staplers, compressors, and collated fasteners. From home electronics to social infrastructure, materials, logistics, and services, Hitachi maintains exacting standards of development and production while making social and environmental sustainability a key priority. They currently have headquarters in Japan, the United States, and Canada, and over 1,000 authorized service centers.
What's in the Box DS10DFL micro driver drill, WH10DFL micro impact driver, two 12-volt peak 1.5 Ah lithium-ion batteries, quick charger, carrying bag, Phillips driver bit, manuals, and warranty cards.
Hitachi KC10DFL 12-Volt Peak 2-Tool Li-Ion Combo Kit with Carrying Bag Reviews
I used a friend's sub-compact impact driver (Bosch 12V) to finish a deck this summer, which was enough to quickly convince me that these little impact drivers were absolute wonders for driving screws (of any size or type). They have plenty of power, they don't strip out the screw heads, and they don't transfer any torque or twist to your wrist. Impact drivers are clearly superior to drills for driving fasteners of any type. They are wonderful.So I decided to get my own little impact driver. And a little matching drill as well. Just as well be hung for a sheep as a goat.After spending about an hour driving screws and lag bolts in the parking lot of ACME Electric (Tool Crib of the North), I decided I liked the Makita 10.8V sub-compacts better than the Bosch and the Milwaukee sub-compacts. All three were excellent products, but the Makitas were the speediest and fit my hand the best (the Makita sub-compact driver has a two speed gear box which made for speedier drilling). The Milwaukee had a tisch more power but, by comparison, was a good bit bulkier than Makita. All three brands had plenty of power for driving screws. These products are so close in performance the determining factor will likey be which one feels best in your hand (or which color you like best). The Makita is the most compact and has the trimmest handle. The Milwaukee is the largest and has the thickest handle. The Makita spins the fastest. The Bosch is a little slow for drilling. I went with comfort and compactness, (and speed) and I brought the Makita set home.But, while wandering through Lowes a couple days later, I saw these trim Hitachi 12-volt compacts. They felt great in my hand, even trimmer and better balanced than the Makitas. As I was still in the trial period for the Makitas, I decided to get the little Hitachi set and compare the two at home.The next day, I brought a couple 2X6 boards into the kitchen, charged up all the batteries and started comparing, drill to drill and impact driver to impact driver.I put a quarter-inch bit in each drill and started drilling. Both the Makita and Hitachi were impressive for their size. But the Hitachi was clearly the speedier drill. And when the Makita wore down, the Hitachi was still going full speed. I did twenty more holes, and then stopped. The Hitachi was still going full speed, but I had learned enough about the drill. The Hitachi was faster and ran longer, clearly so.I then compared the impact drivers by driving lag bolts into the holes I just drilled. Again, both drivers were impressive, but the Hitachi was speedier. Clearly so. And when the Makita wore down, the Hitachi was still going strong.I recharged the batteries and then used the impact drivers for drilling with a 3/8" bit. The Hitachi made speedy work of it and didn't need to go into the "chatter" mode. The Makita was slower and had to go to "chatter" to finish off the hole. (chatter= impact mode).The Makita 10.8 sub-compact drivers are a great product. (and the Bosch and Milwaukee sub-compacts are nifty as well). But these little Hitachi's have more power, longer run-time, and speedier operation than any of them. And the handle is trimmer and the balance is good (some will find the Bosch and Milwaukee to feel a little thick in the grip).I'm keeping the Hitachi set and returning the Makita.Whatever you decide, do get a compact impact driver of some type. They really put a drill to shame when it comes to driving screws and lag bolts. No screw head stripping, no pushing, and no torque transfer to your wrist.
I am a contractor, and I work with all types of tools on a daily basis. I have to say I was looking for a small and light tool to do finish work indoors, and this set is by far the best option I have seen in a long time. Batteries seem to run all day long, lightwieght tools and plenty of power to tackle all the tasks that I do indoors.I own all the major brands of tools, from 9.6v to 18v tools and this set is perfect for all the cabinet installs, door installs and everything inbetween. If you are looking for a great set for smaller projects this is the one to buy, good solid tools, cheap price, runs all day with plenty of power, and is great in your hands. I am very happy I bought this set.
I was trying to decide between this set and the Makita LCT302W 10.8V set. Both sets got mostly positive reviews and I decided to buy both and try them out. After reading the review that Paul did I was expecting good things from the Hitachi.I was especially excited because locally the Hitachi set was $40 cheaper than the Makita. When I got them home and unboxed them I found that Hitachi came in a carry bag and the Makita in a metal case. The Hitachi bag was well designed to hold all three pieces in separate sections, the Makita case, not so much so. It would only be useful if you plan to keep these on the shelf because if you pick it up the drills will fall right out of the protective foam and bang around.As far as ergonomics go I liked both. The Hitachi had a more traditional shape with a large battery pack on the bottom. This allows the tools to more easily stand upright but can get in the way in tight places. In the Makita, more of the battery is inside the handle.As far as the drills go I definitely liked the Hitachi better, mostly because of the chuck. The Hitachi has a traditional tool-less chuck while the Makita has 1/4" hex chuck. This means the the Makita either needs special drill bits or an adapter with a traditional chuck.I had the opposite impression of the impact drivers. Both tools did the same thing, but the Makita was not only much easier to use but much faster. The Makita drove #10 2" screws into pine 2x4's in about half the time of the Hitachi and it did so with tremendous ease. The Hitachi felt like it was struggling.In the end, the severe lack of power/speed in the impact driver was a killer for me. Despite that fact that I liked almost everything else about the Hitachi better I ended up bringing it back. If Hitachi could rectify this they would have a great pair of tools on their hands.
Pros: This tool set should be sufficient for small jobs. The design is pretty comfortable, small and light.Cons: The advertised voltage is 12 Volt, which is a bit misleading. Actual usage is around 10 V. The impact wrench did not have enough torque as I tried to remove an old rusted bolt (even though I think that it should have handled it). The impact wrench still failed to remove the bolt even after I easily loosened it with a wrench (with minimal to medium effort).
I bought the 10.8v version of this set in stages, effectively getting four batteries plus the tools, plus individual hard cases for each set, as Lowes cleared them out for $60 a set to make way for the 12v version. Other than price, what mostly drove me toward the Hitachi compacts was the ergonomics. These fit beautifully in the hand, while I found the Bosch, Milwaukee, and Makita equivalents felt bulky, which, over a long day, makes a difference. These are low-volt tools, so I think one has to be realistic about what they will do. That said, I used the drill driver to assemble home-made kitchen cabinets with with about 300 pocket screws, starting from the cases and up. The drill driver was even sufficent to drive 3" screws into studs to hold the cabinets in place. I have used it to do all kinds of pocket screwing and assembly jobs, and for this it is perfect. Where a little more power is needed, I use the impact driver. I have an 18v Dewalt Drill Driver/Impact set for heavier jobs, but do I want to use an 18v driver to install cabinet door hinges? Not particularly. Not only does the use of this set reduce fatiqure and ease the work, but it makes it more precise because you are not fighting the weight of the tool in tight, awkward spaces. The 10.8 version of this set has been more than adequate for anything I have done with it, and I imagine the 12v version even ups the possibilities a little. At the time I bought this, I wondered if price was getting the better of me, and if I really need this; I am very glad I made the purchase. It has paid for itself already.
No comments:
Post a Comment